Step 1 Insert the Compression Nut Over the Tube.
Step 2 Insert the Compression Sleeve Over The Tube.
Step 3 Insert the tube into the Male Fitting.
Step 4 Tighten the nut hand Tight first.
Step 5 Using a wrench tighten the nut 2 full turns.
Lester Says" Don't over tighten the nut"
Step 6 Turn on water and check for leaks Lester Says" If the fitting leaks turn off water then tighten the nut 1 more turn. No pipe joint compound is required for a Compression fitting. Female Compression fitting
Male Compression Fitting
Specifications Standard Compression Fitting for standard home water pressures